ATA Ptx 4 Garage Door Remote - ATA-Automatic Technology Australia

NZ Garage Door Remotes | Discount Garage Door Remotes - Ph: 0211724470  

ATA Ptx 4 Garage Door  Remote
ATA Ptx 4- 433 mhz Garage Door Remote Control
On Sale! Don't miss out!

You Will Receive This Replacement Ptx 4  Slim Remote,More Robust Than The Old Ptx 4 And Very Stylish.

 


This Is Now Replaced By A Very Nice Stylish  Key Ring 4 Button Garage Door Remote  In 2nd Photo

Works Upto 4 Garage  Doors Or Gates

PTX-4/PTX4  This transmitter is compatible with the following ATA SECURALIFT openers:


- Panelift garage door opener GDO-2V5, GDO-2V6, GDO-2V7, GDO-7, 
- Roller garage door opener GDO-6, GDO-8, GDO4V3, GDO4V4, GDO4V5, GDO4V6,  GDO2V5, GDO2V6, GDO2V7, GDO7, GDO7V1
- Roller garage door opener EASYROLLER GDO6, GDO6V2, GDO-8, GDO-8V2, GDO4V3, GDO4V4, GDO-9V1
- Gate SGO-1

ATA-PTX4 Programming Procedure

Art: PTX4 DESCRIPTION

• Automatic Technology - 4 channel garage remote

• Uses SecuraCode® code hopping technology

• Controls upto 4 different doors or gates

• Suitable for pocket, or key chain COMPATIBILITY

• Suits Models: All ATA 433.92MHz Door Motors, ATA GDO-2 v5, v6, v7, ATA GDO-4 v3, v4, v5, v6, ATA GDO-6 v1, v2, ATA GDO-7 v1 SecuraLift II, ATA GDO-8 v1, v2, ATA GDO-9 v1. Not compatible with TrioCodeTM Garage Door Motors.

Remote Programming Steps Storing Transmitter Code PTX4

1. Press and hold the blue ‘Door Code’ button on the opener or ‘SW1’ or ‘SW2’ on the receiver board.

2. Press the remote button you would like to use for 2 seconds.

3. Release the remote button and wait for 2 seconds. Press the same button again for 2 seconds.

4. Release the ‘Door Code’ or ‘SW’ button’.

5. Press transmitter to test.

 

Storing Transmitter from a Remote Location PTX4

1. Take any precoded transmitter. Press the button which functions the door/gate motor and release after activation.

2. Insert a small needle into the ‘Coding Hole’, press and hold firmly.

3. Within 10 seconds using your new remote, press and hold the button you would like to use for 2 seconds.

4. Release the remote button and wait for 2 seconds. Press the same button again for 2 seconds. This button should now be coded.

5. Wait for 10 seconds. Press transmitter to test.

 

Deleting Remote Controls from your Motor

1. Turn off the power to the opener

2. Press and hold the blue ‘Door Code’ button on the opener or ‘SW1’ on the receiver board.

3. Turn on the power on again, while holding the button. The coding LED will illuminate to show the memory has been cleared

Add Review

  • Good Product and Good Price
    works well and is a good size thanks. Great
    Posted: 2019-10-15 by north shore garage door services
  • Posted: 2019-10-15
  • Posted: 2019-09-30
  • ATA Ptx 4 Garage Door Remote
    Excellent service. Very helpful in helping work out the remote I needed. Quick delivery. Thanks.
    Posted: 2019-09-05
  • ATA Ptx 5 Remote
    NZ$ 79.90
    NZ$ 64.00
    View / Add
  • ATA Ptx 5v2 Remote
    NZ$ 79.90
    NZ$ 64.00
    View / Add
  • ATA Ptx2 v1 Tri Code Remote
    NZ$ 79.90
    NZ$ 64.00
    View / Add
  • ATA TXA-1 Garage/Gate Remote
    NZ$ 97.00
    NZ$ 79.00
    View / Add
  • ATA TX5 Garage Door Remote
    NZ$ 78.00
    NZ$ 55.00
    View / Add
  • Dominator 5v2 Remote
    NZ$ 79.90
    NZ$ 64.00
    View / Add
  • ATA PTX 2V2 Replacement Remote
    NZ$ 79.90
    NZ$ 64.00
    View / Add

Contact Details

Phone:0211724470
Mobile:0211724470
Email:sales@garagedoorremotes.co.nz

Request More Information

Details of the product above will be automatically included with your enquiry.

RRP:
NZ$ 78.00
Savings:
NZ$ 23.00 (a 29% discount)
Price:
NZ$ 55.00 including GST
Price for 3+:
NZ$ 50.00 per item
ata ptx 4
Purchase Qty:
 
Rating:
( 5/5 from 4 reviews )
  •  Comes With New Battery Installed
  • 12 Month Warranty
  •  Easy Instructions On Product Page
  • Delivery Takes 1- 3 Days