UPGRADED REPLACEMENT REMOTE CONTROL COMPATIBLE WITH 8 DIP SWITCH PARKER TILT-A-MATIC AND THE OTHER REMOTES BELOW.
Suits TRG306 TRG303 TRG300 TR300 TRV300 TV300 Tilt A Matic Tiltamatic 303mhz Parker And Doormate.
** please note** some windsor models the switches in the new remote will be the opposite of the current remote or circuitboard.e.g if your number 1 is on the new remote number 1 will be off etc
- You will receive the red button keyring remote not the Old obsolete large original remote
- Works and easily codes the same as the old large 8 switch remote
- 8 dip switch coding
- Just copy the switch setting in your old remote (see Coding Instructions)
- Your existing remotes will continue to work
- Small keychain size with single push button
- You do not need any existing working remotes
- Easy Instructions with step by step photos provided
- Your old tiltamatic might have a blue, black, or red button but they all have 8 switches.
Easy Coding!
** please note** some windsor models the switches in the new remote will be the opposite of the current remote or circuitboard.e.g if your number 1 is on the new remote number 1 will be off etc
1-To Code Just Remove The Cover Of Your Old Remote And Locate Dipswitches.
2-Remove The Cover Of New Remote And Match The 8 Switches To The Same Positions As Old Remotes

*NOTE** IF YOU DO NOT HAVE EXISTING REMOTE
1-Have a look on the back of your garage door opener on the ceiling and you should see a little plastic cover towards the bottom.
take the plastic cover off and you will see 8 little switches.match the on and off positions on your remote to the same as these positions.