Remote control TOP 432 EE is a replacement of TOP 432 NA and TOP 432 EV.
It has a more interesting design and durable casing. It is easily programmed from an existing remote or from the control board. The unit is supplied with easy to follow instructions and can be programmed in less than 30 seconds. Fully compatible with TOP- 432NA, TOP- 432EV, CAME TOP432S & TOP432M transmitters so you can upgrade your existing remotes to this more slimline model if you wish. Replaces Came transmitters TOP series: •432A, 434A •432M, 434M •432NA, 434NA •432SA, 434MA •432S •432EV, 434EV •432EE Technical features: Number of channels: 2 •Frequency: 433,92 MHz •Code: fixed •Range: 50-150 m •Power supply: 2 x 3V lithium batteries CR2016 •Working temperature: -20°C + 55°C •Dimensions: 68x32x13 mm •Weight: 16 g •Battery and instruction included We are fully committed for 100% customer satisfaction
Check out how easy It Is to program your remote control CAME TOP432EE :
Important note: To duplicate or to add a new remote control to your receiver, you would already need one active remote control. During the coding process, if you press one of the butons of the already programmed remote control first, you may erase the codes of all the remote controls that have already been programmed.
1. Press both top buttons on your new remote control at once and keep them pressed until the LED light on your new remote control starts to blink.
2. Press the left button of your new remote control. The LED on your new remote control will light up constantly.
3. While holding the button pressed of your new remote control, place the already programmed remote control next (slightly touch) to the new remote control and press the same button of the already programmed remote control. Keep button on both remote control presed until the LED light of the new remote control blinks 3 times. This means your new remote control has been programmed!
4. Repeat the procedure for each button (channel) you wish to program.